Description
Cisco WS-C2960X-24PD-L
Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base
WS-C2960X-24PD-L Cisco Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base
6,699.00 AED
Cisco WS-C2960X-24PD-L
Catalyst 2960-X 24 GigE PoE 370W, 2 x 10G SFP+, LAN Base
Available on backorder
Related products
WS-X4248-RJ45V Cisco Switch 48 ports
840.00 AEDAdd to cartCisco WS-X4248-RJ45V
● 48 ports
● 10/100 (RJ-45)
● Cisco IOS Software Release 12.2(18)EW or later
● IEEE 802.3af PoE and Cisco prestandard
● Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
VWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
2,940.00 AEDAdd to cartCisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1 Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
2960CX-8TC-L Cisco 8 – Port Compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&Amp;2GE
2,450.00 AEDAdd to cartCisco 2960CX-8TC-L
Cisco Catalyst 2960-CX 8 – port compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&2GE uplinks- LAN Base – Managed Product Code WS-C2960CX-8TC-L Feature Set LAN Base Uplink Interfaces 2 x 1G copper plus 2 x 1G SFP Ports 8 x 10/100/1000 Gigabit Ethernet ports Forwarding Bandwidth 12 Gbps Switching Bandwidth (full-duplex capacity) 24 Gbps RAM 512 MB Flash Memory 128 MB Dimensions 4.44 x 26.9 x 21.3 cm Package Weight 4.38 Kg
Reviews
There are no reviews yet.