-
VIC3-2FXS/DID Cisco Voice Interface Card Includes Two FXS Ports.
Cisco VIC3-2FXS/DID
Specification
VIC3-2FXS/DID Specification
General
Device Type Voice / fax module
Form Factor Internal
Modem
Connectivity
Technology
Wired
Analog Ports
Qty
2
Expansion / Connectivity
Interfaces 2 x network – FXS/DID – RJ-11
Compatible
Slots
1 x expansion slot
Miscellaneous
Compliant
Standards
FCC Class B certified, UL 1950
Software / System Requirements
OS Required Cisco IOS 12.4(15)XZ$ 304.94 -
VWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
Cisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1 Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
$ 800.48 -
WS-C2960+24LC-S Cisco Switch LC-S 24 Port
Cisco Switch WS-C2960+24LC-S
Specifications
Type Fixed Topology Ethernet (10/100BaseTX)
Ethernet (10/100/1000BaseT)
Gigabit Ethernet (SFP)Maximum Port density 8 10/100 PoE ports, 16 10/100 ports Uplinks 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Modular/Expansion Slots n/a Architecture Layer 2 Switching (basic connectivity), Voice Enabled Form Factor Fixed, Rack Mountable, Standalone/Clustering Dimensions 1.73 x 17.5 x 13 in. DRAM 64 MB $ 1,421.80WS-C2960+24LC-S Cisco Switch LC-S 24 Port
$ 1,421.80 -
WS-C2960+24TC-S Cisco Switch TC-S 24 Port
Cisco Product Code WS-C2960+24TC-S
Enclosure Type 1 RU
Feature Set LAN Lite
Uplink Interfaces 2 (SFP or 1000BASE-T)
Ports 24 x 10/100 Ethernet Interfaces
Forwarding Bandwidth 16 Gbps
DRAM 128 MB
Flash Memory 64 MB
Dimensions 4.4 x 45.0 x 24.2 cm
Package Weight 7.73 KgSpecification
Configurations
10/100 Ethernet Interfaces – 24
Uplink Interfaces – 2 (SFP or 1000BASE-T)
Cisco IOS Software Feature Set – LAN Lite$ 419.30 -
WS-X4248-RJ45V Cisco Switch 48 ports
Cisco WS-X4248-RJ45V
● 48 ports
● 10/100 (RJ-45)
● Cisco IOS Software Release 12.2(18)EW or later
● IEEE 802.3af PoE and Cisco prestandard
● Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
$ 228.71WS-X4248-RJ45V Cisco Switch 48 ports
$ 228.71 -
2960CX-8TC-L Cisco 8 – Port Compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&Amp;2GE
Cisco 2960CX-8TC-L
Cisco Catalyst 2960-CX 8 – port compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&2GE uplinks- LAN Base – Managed Product Code WS-C2960CX-8TC-L Feature Set LAN Base Uplink Interfaces 2 x 1G copper plus 2 x 1G SFP Ports 8 x 10/100/1000 Gigabit Ethernet ports Forwarding Bandwidth 12 Gbps Switching Bandwidth (full-duplex capacity) 24 Gbps RAM 512 MB Flash Memory 128 MB Dimensions 4.44 x 26.9 x 21.3 cm Package Weight 4.38 Kg $ 667.07 -
3560CX-12PC-S Cisco Switch 12 Ports Managed Rack Mountable
Cisco 3560CX-12PC-S
Cisco Switch 12 Ports Managed Rack Mountable
GENERAL
-
Enclosure TypeDesktop, rack-mountable, DIN rail mountable, wall-mountable 1U
-
SubtypeGigabit Ethernet
-
Ports12 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP
-
Power Over Ethernet (PoE)PoE+
-
PoE Budget240 Watt
-
Jumbo Frame Support9018 bytes
-
Authentication MethodKerberos, RADIUS, Secure Shell (SSH), TACACS+
-
RAM512 MB
-
Authentication MethodKerberos, Secure Shell (SSH), RADIUS, TACACS+
-
Power Over Ethernet (PoE)PoE+
-
Status IndicatorsPort status, port transmission speed, port duplex mode, system, link/activity
-
Routing ProtocolRIP-1, RIP-2, static IP routing
-
Jumbo Frame Support9018 bytes
-
PoE Budget240 W
-
ManufacturerCisco
$ 1,067.31 -
-
N205.624 Nexans Adapter DSC-DSC Single mode
Nexans N205.624
LANmark-OF Snap-in Adapter DSC-DSC Single mode
Description
LANmark-OF snap-in adapters have been designed for snapping into the
modular OF patch panels and ZD boxes. They are available in single SC,
dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector
types offer double density, as two fiber connections are offered on the SCtype
footprint. Installation time is saved as the snap-in concept replaces
the time-consuming screwing attachment of coupling devices.
Materials
· Adapter Housing: PBT, 15% Glass
· Sleeve Holder: PBT, 20% Glass
· Dust Cap: PP
· Spring:SUS 304 CSP 3/4 H
· PB Sleeve: PB – inner diameter 2,48mm – length 11.4mm
· Zirconia Sleeve: ZA Ceramic – inner diam.: 2.48mm -length11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)$ 8.17 -
N205.617 Nexans Duplex LC Snap-In Adaptor Multimode Aqua
11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)$ 6.26 -
N121.4MLY Nexans Pigtail LC/UPC Singlemode 9/125 1m Yellow
Pigtail characteristics
· Fibre assembly to terminate cable with fusion splicing
· Suitable for use in patch panels using splice cassettes.
· The pigtails can be stripped in one action over a long distance up to 100cm.
Fibre type
The LANmarkOF
OM3 pigtails have LANmarkOF
OM3 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.2b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM4 pigtails have LANmarkOF
OM4 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.3b. The pigtail jacket is Aqua.
·
The LANmarkOF
OM5 pigtails have LANmarkOF
OM5 GIGAliteFLEX fibre inside.
This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is
compliant to IEC 60793210,
fibre model A1a.4b. The pigtail jacket is Lime Green.
·
The LANmarkOF
SM pigtails have LANmarkOF
SM GIGAliteFLEX fibre
inside. These fibres are bend insensitive and compliant to ITUT
G.657.A1 and to
IEC 60793250,
fibre model B6.a1. The pigtail jacket of the singlemode pigtails is
yellow.$ 5.45 -
N102.105BK Nexans 1HU Patch Guide with Rings, Black
Nexans
Patch Guides, Blank Panels & Cable Management
· Patch guides to manage and store all patch cords.
· 1 HU and 2 HU for high density.
· 1 HU with rings for easy access.
· Cable guide for all patch panels without clip-on.$ 14.70 -
N42i.101 Nexans DIN-Rail Outlets and Boxes
NEXANS
· For DIN-Rail mount (35mm)
· Data connection for the industry
· For up to 6 copper of fibre optic Snap-In connectors (not included)
· Splice trays as accessories
· For technical enclosures, Wireless Access Points, Industrial cabinets
· Snap-In connectors not included· Robust metal body, powder coated
· IP20 protection rating with individual dust shutters
Possibility of Individual port colour coding through coloured shutter
· up to 6 LANmark RJ45 or GG45 Snap-In jacks
· up to 6 SC Snap-In couplers (6 fibres)
· up to 3 SC duplex Snap-In couplers (6 fibres)
· up to 6 LC duplex Snap-In couplers (12 fibres)
·
· Mix of copper jacks and optic adapters possible
· Strain release through cable gland or tie wraps
· Removable (screws) side cover
Type of cables
· Shielded Industrial Category 6 and 7 data cables, AWG 24 to AWG23
· Fiber optic cables up to 15mm diameter
· Simplex – Duplex and breakout fibre optic cables
· Tight buffer or loose tube fibre optic cables
· Pre-terminated cables$ 127.70
