-
N420.66A Nexans LANmark-6A Snap-In Connector
N420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A specifications defined in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This significantly reduces the installation
cost for 10G network cabling.• 10 BASE-T Ethernet
• 100 BASE-T Fast Ethernet
• 1000 BASE-T Gigabit Ethernet
• 10G BASE-T Gigabit Ethernet IEEE 802.3
• 155 Mbit ATM
• 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).$ 6.26 -
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well fixed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.70 -
N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04 -
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M UTP Cable Cat 6 3M-305 Mtr Box Belonging to the 3M Volition Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards. Length markings on the cable sheath. Low smoke, zero halogen (LSOH) and PVC versions available Benefits.Good headroom over Category 6 performance. Installer friendly. Solutions for all levels of fire protection.
$ 114.35 -
SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.36 -
OPTRONICS OPPC-XX-1-24-UL
OPTRONICS OPPC-XX-1-24-UL
Unloaded 1u KeyStone Panel Frame
$ 10.35OPTRONICS OPPC-XX-1-24-UL
$ 10.35 -
OPTRONICS OKJ-6A-1-TL
OPTRONICS OKJ-6A-1-TL
CAT6A UTP Tool free Keystone Jack
$ 3.05OPTRONICS OKJ-6A-1-TL
$ 3.05 -
OPTRONICS OPT-00-4-01
OPTRONICS OPT-00-4-01
LC OM4 Fibre Pigtail 1mtr Tight Buffered 900um Aqua
$ 2.04OPTRONICS OPT-00-4-01
$ 2.04 -
OPTRONICS OFC-LT-41-12
OPTRONICS OFC-LT-41-12 ( 1000 METER )
OM4-12 CORE-LOOSE TUBE-E GLASS-BLACK-ULSZH-OM4
$ 3,354.39OPTRONICS OFC-LT-41-12
$ 3,354.39 -
OPTRONICS OPCC-6-112-01
OPTRONICS OPCC-6-112-01
CAT6 UTP 4P RJ45 Patch Cord 1mtr -PVC GREY – Continuity Tested
$ 2.10OPTRONICS OPCC-6-112-01
$ 2.10 -
OPTRONICS OPPC-6-1-24-P
OPTRONICS OPPC-6-1-24-P
CAT6 UTP 1U 24 Port Panel Duel IDC -PCB Type
$ 30.49OPTRONICS OPPC-6-1-24-P
$ 30.49 -
OPTRONICS OCC-6-12-305
OPTRONICS OCC-6-12-305
Cat 6 U/UTP 23 AWG PVC Cable Grey 305m Box
$ 114.35OPTRONICS OCC-6-12-305
$ 114.35