-
-
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M UTP Cable Cat 6 3M-305 Mtr Box Belonging to the 3M Volition Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards. Length markings on the cable sheath. Low smoke, zero halogen (LSOH) and PVC versions available Benefits.Good headroom over Category 6 performance. Installer friendly. Solutions for all levels of fire protection.
$ 114.35 -
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.77 -
DSX2-8000MI INT Fluke Tools and Tester
Fluke DSX2-8000MI INT Tools and Tester
DESCRIPTION
2 GHz DSX-8000 Cat 8 CableAnalyzer, CertiFiber Pro Multimode OLTS Modules & Inspection Camera: Wi-Fi enabled Versiv2 Main & Remote + DSX Copper (2)Cat 8 modules + MultiMode OLTS (2) modules + Inspection camera
$ 32,529.68DSX2-8000MI INT Fluke Tools and Tester
$ 32,529.68 -
DSX2-5000 INT Fluke Testing Tools and Equipment
Fluke DSX2-5000
1 GHz DSX-5000 Wi-Fi enabled CableAnalyzer: Versiv2 Main & Remote + DSX Copper modules (2)
$ 16,627.64DSX2-5000 INT Fluke Testing Tools and Equipment
$ 16,627.64 -
N424.532 Nexans UK Style Backbox Single Gang White
Nexans N424.532
UK Style Backbox Single Gang White
DESCRIPTION
LANmark Snap-In Modules in standard UK styles
· 25 x 50 mm angled and flat shuttered modules for 1 LANmark Snap-In connector
· LJ6C angled and flat shuttered modules for 1 LANmark Snap-In connector
· 50 x 50 mm angled shuttered modules for 2 LANmark Snap-In connectors$ 2.45 -
VOL-FPUK-2K 3M (2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
3M VOL-FPUK-2K
(2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
DESCRIPTION
A wide range of face plates and boxes are available for the ‘K’
series Jacks which ensure easy fitting and smart presentation of
the RJ45 outlet. Vertical and 30° angled versions are offered in
local country adaptations giving the ability to surface or flush
mount. The Keystone mounting feature of the Jack may allow you to
use VF-45TM or other Keystone boxes or face plates.
Different colour options are available in some versions. A label
holder and white application icon (coloured icons are available) finish
the presentation to give a smart and functional appearance.
The choice of UTP, FTP or STP 360° braid or foil connection offers
you the required electromagnetic compatibility level you require.$ 3.54 -
VOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacks$ 47.65 -
N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
N116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 27.23 -
N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
N116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 11.71 -
N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 7.02 -
N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 6.81