Subtotal: 20,274.00 AED
590.00 AED
RITTAL 1936200
EL1936 6U BLANKING PLATE PKT-3
Description
To neatly finish off free locations within the mounting level.
Material Aluminium
Surface finish Natural anodised
Dimensions Width: 19″
Units 6 U
Packs of 3 pc(s).
Weight/pack 3.38 kg
Available on backorder
RITTAL 1936200
EL1936 6U BLANKING PLATE PKT-3
Description
To neatly finish off free locations within the mounting level.
Material Aluminium
Surface finish Natural anodised
Dimensions Width: 19″
Units 6 U
Packs of 3 pc(s).
Weight/pack 3.38 kg
RITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).
RITTAL SR 2340.700
Pivoting Frame, large, without trim panel for TS, SE,600 mm and 1200 mm wide enclosures
Product description
Description: To mount 482.6 mm (19″) equipment.
Material: Carbon steel
Surface finish: Zinc-plated
Mounting tip: Depending on the installation situation TS punched sections with mounting flange, 23 x 73 mm,
or TS punched sections with mounting flange, 17 x 73 mm are required
Supply includes: Cam with double-bit lock insert
Parts for attaching to the installation kit
RITTAL SZ 4140.010
Cabinet Compact Light
Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yes
Reviews
There are no reviews yet.