-
FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.59 -
FPSLSCSX0241B Opterna 19″ Unloaded 1U Sliding Patchpanel 24 SC Simplex (LC Duplex) Port- Black
FPSLSCSX0241B Opterna
DESCRIPTION
The Opterna Fiber Optic 19” Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U and 4U height increments.
The sliding tray provides easy access to fiber cabling, making this panel ideal for ‘Pay as you Grow’ applications. The panel supports 24 way, 48 way and 96 way configurations in SC Simplex, SC Duplex, ST/FC (D cut out), LC Duplex (SC simplex foot print), LC Quad (SC Duplex foot print). Versions are available with MTP MPO cut-outs on the back for use with pre-terminated MTP/MPO trunks.
$ 57.18 -
FSC24 PANDUIT Panduit Splice Chip 24port fusion splices w/level
FSC24 PANDUIT
DESCRPTION
Accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit® Opticom® Enclosure.
$ 7.62 -
FSC24 Panduit Splice Chip 24port Fusion Splices W/Level
Panduit FSC24
Splice Chip 24port Fusion Splices W/Level
DESCRIPTION
Fiber splice chip accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit Opticom Enclosure.
$ 7.62 -
GLC-LH-SMD= Cisco 1000BASE-LX/LH SFP Transceiver Module, MMF/SMF, 1310nm, DOM
Cisco GLC-LH-SMD=
1000BASE-LX/LH SFP Transceiver Module, MMF/SMF, 1310nm, DOM
DESCRIPTION
The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
$ 209.65 -
GLC-SX-MMD Cisco 1000BASE-SX SFP Transceiver Module, MMF, 850nm, DOM
Cisco GLC-SX-MMD
1000BASE-SX SFP Transceiver Module, MMF, 850nm, DOM
DESCRIPTION
Type Multimode
* 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic,
complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively$ 111.63 -
KB31RJK Schneider 1G FACE PLATE FOR KEYSTONE JACK – UL
Schneider KB31RJK
1G FACE PLATE FOR KEYSTONE JACK – UL
DESCRIPTION
Range Vivace
Device short name KB31
Complementary
Number of gangs 1 gang$ 3.27 -
KB32RJK Schneider 2G FACE PLATE FOR KEYSTONE JACK – UL
Schneider KB32RJK
DESCRIPTION
2G FACE PLATE FOR KEYSTONE JACK – ULRange Vivace
Device short name KB32
Complementary
Number of gangs 2 gangs$ 3.54 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.24 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.24 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
NKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
$ 5.99 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
Panduit NKFP91BN1NNM001
LC SM OS2 Pigtails
DESCRIPTION
Fiber Size: Pigtails: 900μm tight-buffered fiber
Patch Cords: 1.6mm or 3.0mm duplex jacketed zip cord cable
Cable Jacket Ratings: Riser (OFNR): Per UL 1666 and c(UL) FT-4
Low Smoke Zero
Halogen (LSZH): Per IEC 60332-1, IEC 60754-2, IEC 61034
Connector Types: LC, SC, and ST$ 5.72