-
AX101456 BELDEN 24 Port Cat6 UTP Patch Panel, Unloaded
BELDEN AX10145624 Port Cat6 UTP Patch panel, UnloadedDESCRIPTIONThe AX101456 from Belden is a 24 port Flex patch panel with MDVO style. It is compatible with a variety of modules that are suitable for use with Belden IBDN 10GX, 4800, 3600, 2400 and 1200 systems.- Flush front connection
- Rear termination
- Steel panel
- Operating temperature range from -10°C to 60°C
- Rack unit is 1U
- Black colour panel
$ 26.14 -
GT-39LC001MR12 BELDEN FIBER PIGTAIL, LC, OM3 50/125UM, 1 MTR (12 Pcs pack)
BELDEN GT-39LC001MR12
FIBER PIGTAIL, LC, OM3 50/125UM, 1 MTR (12 Pcs pack)
General Description:
FX FIELD-TERMINATION PIGTAIL, OM3, LC SIMPLEX, TIGHT BUFFER 900 UM, SINGLE-ENDED, 2M,
AQUA BUFFER$ 89.58 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.96 -
DSX2-8000MI INT Fluke Tools and Tester
Fluke DSX2-8000MI INT Tools and Tester
DESCRIPTION
2 GHz DSX-8000 Cat 8 CableAnalyzer, CertiFiber Pro Multimode OLTS Modules & Inspection Camera: Wi-Fi enabled Versiv2 Main & Remote + DSX Copper (2)Cat 8 modules + MultiMode OLTS (2) modules + Inspection camera
$ 32,529.68DSX2-8000MI INT Fluke Tools and Tester
$ 32,529.68 -
DSX2-5000 INT Fluke Testing Tools and Equipment
Fluke DSX2-5000
1 GHz DSX-5000 Wi-Fi enabled CableAnalyzer: Versiv2 Main & Remote + DSX Copper modules (2)
$ 16,627.64DSX2-5000 INT Fluke Testing Tools and Equipment
$ 16,627.64 -
WMPFSE Panduit 1U Cable Manager
Panduit WMPFSE
1U Cable Manager
DESCRIPTION
Horizontal cable managers shall be capable of managing
cables on the front and rear of any 19″ EIA rack. The
manager shall consist of a 1-piece construction that is
molded out of plastic. Horizontal managers shall have
pass through holes that incorporate integral bend radius
control as well as fingers with rounded edges. The
manager shall have rigid end fingers that incorporate
integral bend radius control. Hinged covers shall allow
access to the cable pathway without having to completely
remove the cover from the manager.$ 22.87WMPFSE Panduit 1U Cable Manager
$ 22.87 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
Panduit NKFP91BN1NNM001
LC SM OS2 Pigtails
DESCRIPTION
Fiber Size: Pigtails: 900μm tight-buffered fiber
Patch Cords: 1.6mm or 3.0mm duplex jacketed zip cord cable
Cable Jacket Ratings: Riser (OFNR): Per UL 1666 and c(UL) FT-4
Low Smoke Zero
Halogen (LSZH): Per IEC 60332-1, IEC 60754-2, IEC 61034
Connector Types: LC, SC, and ST$ 5.72 -
FSC24 Panduit Splice Chip 24port Fusion Splices W/Level
Panduit FSC24
Splice Chip 24port Fusion Splices W/Level
DESCRIPTION
Fiber splice chip accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit Opticom Enclosure.
$ 7.62 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.24 -
NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
NKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
$ 5.99 -
FSC24 PANDUIT Panduit Splice Chip 24port fusion splices w/level
FSC24 PANDUIT
DESCRPTION
Accommodates and protects up to 24 fusion splices. Comes with label, clear cover, and adhesive mount. For use with any Panduit® Opticom® Enclosure.
$ 7.62 -
NN01408.3M12 BELDEN 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded
NN01408.3M12 BELDEN
12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loaded Product
Description
1U FiberExpress@EASE 12 Duplex LC (24 fiber) OM3 Termination/Splice Patch Panel – Half loadedWeight: 2.500 kg
Height: 44 mm
Width: 482 mm
Depth: 251.5 mmFront Connection: Flush
Footprint/Type: LC$ 184.87