-
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,601.26 -
1323-428813BK NORDEN Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
NORDEN 1323-428813BK
Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
FEATURES
Intelligent design ensures easy installation
Cable entry through bottom and top panel
180 degree turning angle for front door
Toughened glass door
Removable side panel provides easy maintenance
19” installation
Plinth (optional)Material SPCC cold rolled steel
Deg. of Protection IP20
Surface finish
Material thickness Mounting profile: 2.0 mm, Angel: 1.5 mm, Other: 1.2 mm
Loading capacity 800 KGS
Degreasing, phosphoric, powder coated$ 816.97$ 871.44 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.28 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.28 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.93PUNDUIT NUL6X04WH-HEG
$ 233.93 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.25PUNDUIT NUC6C04BU-CE
$ 140.25 -
121-21P18048L NORDEN Category 5e UTP Patch Panel 48 Port Loaded
NORDEN 121-21P18048L
Category 5e UTP Patch Panel 48 Port Loaded
DESIGN & MATERIALS
Panel Type Flat
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm & 2U: 88.4 mm
Outlet Style Unkeyed RJ-45
Outlets 24 – 48 Modular Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 97.42 -
421-1SC024BK NORDEN SC Simplex 24 Port EFA Fibre Optic Compact Patch Panel Rack Mount
NORDEN 421-1SC024BK
FIBRE OPTIC EASY FRONT ACCESS COMPACT PATCH PANEL
FEATURES
Easy front access .
Front Panel equiped with adaptors.
Sliding patch panel for easy rework and maintenance.
Cable clamps on the inner surface for fixing cables.
19 ̋ rack mount 1U Size.
Fixed Splice tray for splice utilisation designed with plexi glass top – cover & PC material .
Patch panels for SC,LC,ST,FC,MTRJ & E2000.
The enclosure is made of cold rolled steel sheet, with electrostatic – spraying.DESIGN & MATERIALS
Mounting Type Rack
Colour Black or Beige or white
Material Cold rolled carbon sheet steel with electrostatic spraying
FIBRE OPTIC EASY FRONT ACCESS
COMPACT PATCH PANEL
Norden EFA Fiber Optic Compact Patch panel is designed for fiber
termination and distribution.This smart design and professional
engineering provides easy installation and maintenance
Rack Type Sliding
‘U’ Size 1U=12/24port
Cable Port Max. 2-4
Environment Temperature- Relative -40 ºC to +80 ºC
Humidity ≤85 % (30 degree)
Atmosphere Pressure 70-106 KPa
Intensity ≤15kv(DC) /1min.no spark-over and no flying arc
Fibre Bending Radius ≥ 40 mm
Material Thickness 2mm
Insulated Resistance ≥2*10M Ohm/500V (DC)
Adaptor Port Simplex$ 83.88 -
121-21P18024B Norden Category 5e UTP Patch Panel 24 Port Unloaded
Norden 121-21P18024B
CATEGORY 5E UTP PATCH PANEL
DESIGN & MATERIALS
Panel Type Flat
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm & 2U: 88.4 mm
Outlet Style Unkeyed RJ-45
Outlets 24 – 48 Modular Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 57.19 -
121-31T18048B Norden Cat 6 UTP Patch Panel Blank Tool less 48 Port
121-31T18048B Norden
DESCRIPTION
Blank UTP Tool Less patch panel from Norden exceeds TIA and ISO component specifications, supporting network convergence protocols, delivering maximum bandwidth and extended reliability for all LAN, multimedia, and Power over Ethernet applications. Each port of the panel is numbered and has a designated label area for clear port identification. Keystone outlets can be snapped in to the 19’’ frame without the need for tooling of any type and is supplied in unloaded version.The tool-less jack termination offers fast and reliable installation of unshielded cable, quick and easy in termination. A rear cable management bar is supplied which acts as a stress reliever of terminated cables. The patch panel comes with mini cable ties, cage nuts and rear cable management bar as standard. Enhanced cable retention fixture and unique assembly. Supports solid 22-24 AWG wires and stranded 24-26 AWG.
$ 46.30 -
121-31A18024B NORDEN Category 6 UTP Angled Patch Panel Blank Tool Less 24 Port
NORDEN 121-31A18024B
Category 6 UTP Angled Patch Panel Blank Tool Less 24 Port
DESIGN & MATERIALS
Panel Type Flat
Panel Style Blank
Mounting Style Tool Less (Module)
Panel Width 483 mm (19”)
Panel Height 1U (24 port), 2U (48 port)
Panel Depth 79.5 mm
Outlet Style Unkeyed RJ-45
Outlets 24 Ports & 48 ports
Angle 180 Degree
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, UL 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability Rating UL 94V-0
Safety Rating UL1863
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 44.53 -
121-31A18024B Norden Cat 6 UTP Angled Patch Panel Blank Tool less 24Port
121-31A18024B Norden
DESCRIPTION
The Unshielded angled patch panels are ideal for Data centerapplications where rack space is limited. These ergonomically designed panel provide aesthetic look combined with easy cable management. It exceeds TIA and ISO Component specifications, supporting network convergence protocols delivering maximum bandwidth and extending reliability for LAN, multimedia, and power over Ethernet applications The rear cable management bar also acts as a stress reliever along with the function of managing cable. All performance parameters, including NEXT, FEXT Attenuation and Return Loss are designed to meet the Cabling standard. 19” (1U: 24 port & 2U: 48 port) patch panel comes with mini cable ties, cage nuts and rear cable management bar.
$ 44.39
