-
DSX2-8000MI INT Fluke Tools and Tester
Fluke DSX2-8000MI INT Tools and Tester
DESCRIPTION
2 GHz DSX-8000 Cat 8 CableAnalyzer, CertiFiber Pro Multimode OLTS Modules & Inspection Camera: Wi-Fi enabled Versiv2 Main & Remote + DSX Copper (2)Cat 8 modules + MultiMode OLTS (2) modules + Inspection camera
$ 32,529.68DSX2-8000MI INT Fluke Tools and Tester
$ 32,529.68 -
DSX2-5000 INT Fluke Testing Tools and Equipment
Fluke DSX2-5000
1 GHz DSX-5000 Wi-Fi enabled CableAnalyzer: Versiv2 Main & Remote + DSX Copper modules (2)
$ 16,627.64DSX2-5000 INT Fluke Testing Tools and Equipment
$ 16,627.64 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.96 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.24 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.24 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.88PUNDUIT NUL6X04WH-HEG
$ 233.88 -
SNH-C6417BN SAMSUNG 1080P, Wi-Fi Single Band, IR-10M, 2-Way Audio, Micro SD
SAMSUNG SNH-C6417BN
1080P, Wi-Fi Single Band, IR-10M, 2-Way Audio, Micro SD
DESCRIPTION
- Small and simple design
- 1080p Full HD streaming and recording
- High capacity of storage (Max 128GB)
- 130° Ultra-Wide View Angle
- Wide Dynamic Range
- Improved Night Vision
- Lens Distortion Correction
$ 169.63 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.22PUNDUIT NUC6C04BU-CE
$ 140.22 -
ACT4P6UCM3RBBU Schneider Category6, 4pr UTP Cable 305m Blue
Schneider ACT4P6UCM3RBBU
Category6, 4pr UTP Cable 305m Blue
Description
Range Actassi
Product or component type Copper cable
Colour tint Blue
Cable shielding type U/UTP
Complementary
Type of cable 4 pair cables
Communication network category 6
Minimum return loss 19.4 dB 0.772 MHz$ 121.98 -
ACTPP6U24NSS_SE Schneider Actassi C6 UTP PP 24 P 1U loaded
Schneider ACTPP6U24NSS_SE
Actassi C6 UTP PP 24 P 1U loaded
DESCRIPTION
Range of product Actassi
Product or component type Patch panel
Device application Communication
Device presentation Loaded
Provided equipment With RJ45 connectors
Rear cable manager
Front label holder 3
Cable fixing hardware
Mounting hardware
Retaining cap
With shutter
Colour tint Front plate blue glossy
Colour code 568 A/BNumber of port 24 port of UTP
Product compatibility standard 19″ cabinet/rack
AWG gauge AWG 24…AWG 22Number of rack unit 1U
Plug, socket, control station shape Straight$ 66.71 -
WMPFSE Panduit 1U Cable Manager
Panduit WMPFSE
1U Cable Manager
DESCRIPTION
Horizontal cable managers shall be capable of managing
cables on the front and rear of any 19″ EIA rack. The
manager shall consist of a 1-piece construction that is
molded out of plastic. Horizontal managers shall have
pass through holes that incorporate integral bend radius
control as well as fingers with rounded edges. The
manager shall have rigid end fingers that incorporate
integral bend radius control. Hinged covers shall allow
access to the cable pathway without having to completely
remove the cover from the manager.$ 22.87WMPFSE Panduit 1U Cable Manager
$ 22.87 -
PUNDUIT NKFP24Y
PUNDUIT NKFP24Y
NK Modular Patch Panel, Flat, 24 Port, 1 RU
$ 15.52PUNDUIT NKFP24Y
$ 15.52