-
MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
EXFO MAX-720C-Q1- QUAD-XX
DESCRIPTION
MAX-720C, QUAD OTDR Module
Port 1: 850/1300 nm, 27/29 dB (50/125 & 62.5/125 μm)Port 2: 1310/1550 nm 36/35 dB (9/125 μm)
$ 12,366.59MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
$ 12,366.59 -
S8212B PANDUIT 42U 800×1000 Floor Stand Cabinet with all Accessories
PANDUIT S8212B
42U 800×1000 Floor Stand Cabinet with all Accessories
DESCRIPTION
• Front Single Hinge Door and Split Perforated Rear Door with 69% Open Perforation
• Vertically Split Hinged Side Panels (if applicable)
• Vertical Blanking Panel
• 1 Set of PDU Brackets (SPDUBRK)
• Heavy-Duty Casters and Leveling Legs
• Ganging Brackets
• Rear Equipment Rails Accommodate Cable Management Fingers (Fingers Sold Separately)
• Fully Integral Bonded without the Use of Grounding Wires – Equipment Rails, Door and Side Panels
• Static Load Rating – 3000 lbs & Rolling Load Rating – 2500 lbs$ 1,600.96 -
NKFD1W12BUDLCZ PANDUIT 24port LC Duplex (48port) Patch Panel with Adaptor
NKFD1W12BUDLCZ PANDUIT
24port LC Duplex (48port) Patch Panel with Adaptor
DESCRIPTION
- Factoiy configured with 12 or 24 duplex LC adapters for fast and easy cabling and installation
- Slide-out drawer slides foiward a full 300mm for seivice access to all fiber terminations, connections, and/or splices
- Supports both field termination via pot-and-polish using Panduit NetKey connectors, or fusion splicing with appropriate slack storage and cable management provisions
- Trunk and interconnect cable entiy via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
- Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
- Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
$ 238.24 -
NKFD1W12BUDLCZ PANDUIT 12port LC Duplex Patch panel with adaptor
NKFD1W12BUDLCZ PANDUIT
DESCRIPTION
Pre-loaded fiber drawers provide a pre-configured,ready-to-install system for managing fiber optic terminations. The pre-loaded enclosure is a two-piece design with a slide-out drawer for full access to all fiber terminations and easy installation. The fiber drawer has integral mounting brackets suitable for installation in any 19″ wide EIA 310/IEC60297 compatible rack or cabinet.
$ 238.24 -
PUNDUIT NUL6X04WH-HEG
PUNDUIT NUL6X04WH-HEG
Copper Cable, Cat 6A, 4-Pair, 23 AWG, U/UTP, LSZH (IEC60332-
1), EuroClass Dca-s2-d2-a1, White, Euro pallet, 305m/1000ft$ 233.88PUNDUIT NUL6X04WH-HEG
$ 233.88 -
PUNDUIT NUC6C04BU-CE
PUNDUIT NUC6C04BU-CE
Copper Cable, Cat 6, 4-PR, 24 AWG, UTP, CM, Blue, Euro Pallet, 1000ft/305m
$ 140.22PUNDUIT NUC6C04BU-CE
$ 140.22 -
D60.10865.PSOXX HES Patch Panel Data/Voice 1U 50port
HES D60.10865. PSOXX Patch Panel Data/Voice 1U 50port
Product Overview
50 way voice patch panels are in 1U high density format for greater voice integration than traditional patch panels. Designed to be utilised with any voice combination, of up to three pairs.
Features & Benefits
• Constructed from mild steel with a black finish
• Cat3 compatible
• 6 vertical IDC connectors per RJ45
• 110/LSA compatible IDC connectors
• Perforated cable strain relief for multi-pair cables
• 5 x 10 way circuit boards for modularity
• 19 rack mountable including fixing kit
• UK Manufactured
50 way voice patch panel | V001$ 99.38 -
T70-2206 HES Distribution Box Int 100pr 301A Empty 160x210x121
HES T70-2206
Distribution Box Int 100pr 301A Empty 160x210x121
FUSION TELECOM CONNECTION BOX
Available in 20, 50, 100 pair NB:
T70-2204 – 20 Pair Connection Box is
supplied with 2 x 10 pair disconnection
modules. T70-0035, T70-2205 and
T70-2206, all require disconnection
strips (T70-2203).
340$ 28.04 -
WMPFSE Panduit 1U Cable Manager
Panduit WMPFSE
1U Cable Manager
DESCRIPTION
Horizontal cable managers shall be capable of managing
cables on the front and rear of any 19″ EIA rack. The
manager shall consist of a 1-piece construction that is
molded out of plastic. Horizontal managers shall have
pass through holes that incorporate integral bend radius
control as well as fingers with rounded edges. The
manager shall have rigid end fingers that incorporate
integral bend radius control. Hinged covers shall allow
access to the cable pathway without having to completely
remove the cover from the manager.$ 22.87WMPFSE Panduit 1U Cable Manager
$ 22.87 -
PUNDUIT NKFP24Y
PUNDUIT NKFP24Y
NK Modular Patch Panel, Flat, 24 Port, 1 RU
$ 15.52PUNDUIT NKFP24Y
$ 15.52 -
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
$ 13.34 -
CS-1/CS-8 100-05 HES Cable External Jellyfilled Screened Armoured 100Pr 0.5mm
HES CS-1/CS-8 100-05
Cable External Jellyfilled Screened Armoured 100Pr 0.5mm
DESCRIPTION
- Telephone Cable with cellular polyethylene insulation, jelly filled with petroleum jelly and a polyethylene coating.
- For use in the Local Distribution network.
- Insulated conductors uniformly twisted together to form a pair.
- The water resistant filling compound is applied to the air spaces within the cable core to provide the water-proofness.
- Wrapping is applied over the cable core.
- A flat aluminium foil coated with copolymer on both sides is applied longitudinally over the core covering as screen.
- Black linear-low density polyethylene compound is extruded over the screen.
$ 12.52